 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Control Finish - A dry powdered finishing aid, packaged in an easy-to-use water soluble pack that allows for easy preparation of solutions at the jobsite. Control Finish improves concrete surface finishing characteristics without re-tempering with water, thus avoiding many common surface problems such as plastic shrinkage cracks, dusting, cracking and crazing. Sprayed on lightly and troweled in, Control Finish produces a high quality surface that is easy to finish and extremely durable. Makes stamping and addition of color hardeners much easier. Packaged in two twin inner packs in each printed bag.
Counter-Flo - A mixture of water reducers and mineral admixtures specifically designed for use in the production of concrete countertops and concrete statuary. It makes concrete more flowable for easy placement without adding additional water, allowing you to reduce the water:cement ratio in your mix. By lowering water content you achieve higher compressive and structural strength, thus allowing faster de-molding and a faster cure. Lower water content will also provide a denser and less permeable concrete, making the concrete less prone to staining. Use of Counter-Flo allows you to place a relatively wetter concrete, reducing the amount of air bubbles, so concrete will yield a better pattern definition.
Fill Flow - A dry powdered surfactant packaged in a patented, ready-to-use, water soluble bag. Fill Flow produces controlled low strength material (CLSM), also referred to as flowable fill, controlled density fill (CDF), lean mix backfill, un-shrinkable fill and flowable mortar. Fill Flow is environmentally safe and compatible with all conventional CLSM materials.
Hydrocizer - A dry powdered admixture, packaged in a ready-to-use water soluble bag. Hydrocizer is a polymeric fluid loss additive combined with a premium superplasticizer formulated to physically bind with the water in the concrete and provide maximum water reduction for controlled slump while producing stronger more durable concrete. The special combination yields an admixture suitable for concrete placement in fresh water as well as marine environments.
NS-7 - ready-to-use dry powdered admixture for portland cement grouts. NS-7 is formulated to produce a more uniform and workable non-shrink grout with less water, improved flowability and extended set times. As a non-shrink additive, NS-7 will allow slow, controlled, in-place expansion prior to hardening. As a grout fluidifier, NS-7 will greatly enhance flowability allowing ease of placement with extended handling and set times. NS-7 also significantly reduces water requirements, 10 to 20 percent, yielding increased compressive and flexural strengths.
Rescue-Pak - Contains six of our most effective admixtures proven to solve problems in the field: Supercizer 5, Slick-Pak II, Super Air Plus, Mini Delayed Set, Super Slump Buster, and Standard Delayed Set.
Silica Fume - A finely-divided mineral admixture, available in both un-compacted and compacted forms. It is a pozzolanic material which is composed of highly refined silicon dioxide in the non-crystalline form. Silica Fume will chemically react with the calcium hydroxide released by the hydration of portland cement to form compounds possessing superior cementitious properties. This ultra-fine material will better fill voids between cement particles and result in a very dense concrete with higher compressive strengths and extremely low permeability.
Super Slump Buster - A dry powdered slump reducing admixture packaged in a patented, ready-to-use, water soluble bag. Super Slump Buster is uniquely formulated to provide the ready mix producer with an economical solution to a concrete mix with too high a slump for proper placement. Super Slump Buster is also environmentally safe and compatible with all conventional materials. It contains no cementitious materials, soaps or air entraining agents, and does not affect air content, strengths or water:cement ratio. Super Slump Buster is a viscosity modifier.
Water Conditioner - A dry powdered admixture packaged in a patented, ready-to-use, water soluble bag. It is intended for use in volumetric concrete mixers to prevent false-set problems. False-set is a term used to describe the stiffening of the concrete within one minute after water is added. It is not a "hard set." It happens more frequently in volumetric mixers because mixing times are not long enough and don't go past the false-set condition.
